北京北廣精儀儀器設備有限公司
          品質是生命,服務是宗旨

          Quality is life, service is the tenet

          網站首頁  ◇  產品展示    ◇   ◇   海綿壓縮*變形試驗儀 > *海綿壓縮*變形測定儀

          *海綿壓縮*變形測定儀

          發布時間:  2024-08-12

          產品型號:  

          產品報價:  

          廠商性質:  生產廠家

          所  在  地:  北京市海淀區上地科技園上地十街1號

          產品特點:  本機主要依據ISO1856方法A(ASTM D3574—D JIS K6400-7)設計,用夾具將海綿壓陷至原始厚度的50%,放置將溫度調70的恒溫箱內,待至22個小時之后從中取出壓縮器,將試樣從壓縮器中取出放置30min后,測量厚度,計算其變形量

          同類產品
          更多產品
          產品概述

          海綿泡沫壓縮變形測定儀,海綿變形試驗機,海綿熱變形測定儀,海綿壓縮試驗儀

          型號:HMYS  用途:海綿壓縮  海綿壓縮*變形

          一、特點:指試樣的初始厚度與在規定時間、規定溫度下壓縮后,經過規定恢復時間的試樣zui終厚度差異。差異的大小與初始厚度有關。

          二、主要用途:                                                

             本機主要依據ISO1856方法A(ASTM D3574—D JIS K6400-7)設計,用夾具將海綿壓陷至原始厚度的50%,放置將溫度調70的恒溫箱內,待至22個小時之后從中取出壓縮器,將試樣從壓縮器中取出放置30min后,測量厚度,計算其變形量                                


          三、參數:                                                

          試樣要求:                  50mmX50mmX25mm                            

          在測試薄型試樣時,應使用玻璃板,其厚度為 1-1.5 mm,邊長為 50^55 mm,"                                

          恒溫箱控制溫度:       準確到土10℃                               

          恒溫箱工作電壓:       220V   

          北廣公司其他海綿泡沫檢測儀器:
           海綿泡沫壓陷硬度測定儀-HMYX-2000
           海綿泡沫拉伸強度測定儀-HMLS-1000
           海綿泡沫定載沖擊測定儀-HMPL-2000
           海綿泡沫落球回彈測定儀-HMLQ-500
           海綿泡沫壓縮*變形測定儀-HMYS-200
           海綿泡沫切割機 HMQG-100
           

                 北廣公司所供產品嚴格按照國家標準生產制造,嚴謹的制造環節確保每一臺出廠儀器質量和性能的,服務優質,質優價廉。

                 
                                      以信譽  營客戶     以質量  鑄市場    以技術  保精準   以售后 造未來

                                                    專業、技術、精準、高跨

                :  14700415279
                                   北京北廣精儀儀器設備有限公司    www.beiguangjy.com

           

          Sponge foam compression tester, sponge deformation tester, heat distortion test instrument of sponge, sponge compression tester
          Sponge compression testing machine model: HMYS uses: sponge compression: sponge foam, sponge compression permanent deformation
          Sponge compression testing machine - refers to the initial sample thickness and in a specified time, specified temperature under compression, subject to the provisions of

          the recovery time of the sample final thickness difference. Differences in the size and initial thickness.
          Sponge compression testing machine features:
          The initial sample thickness and in a specified time, specified temperature under compression, subject to the provisions of the recovery time of the sample final thickness

          difference. Differences in the size and initial thickness.
          Sponge compression testing machine is mainly use:
          This machine is mainly based on the ISO1856 method A ( ASTM D3574 - D JIS K6400-7 ) design, fixture sponge indentation to the original thickness of 50%, placing 70 in

          the constant temperature box temperature adjustment, till 22 hours out of the compressor, the specimen from the compressor out after 30min placement, thickness

          measurement, calculation of its deformation amount
          Sponge compression testing machine parameters:
          Sponge compression testing machine specimen requirements: 50mmX50mmX25mm
          In the test of thin specimen, should use the glass plate, the thickness of 1-1.5 mm, 50^55 mm side length, "
          Thermostat control temperature: 10 ℃accuracy to soil
          Constant temperature box working voltage: 220V
          Canton company other sponge foam for detection equipment:
          Sponge foam indentation hardness tester -HMYX-2000
          Sponge foam tensile strength tester -HMLS-1000
          Sponge foam constant-load pounding tester -HMPL-2000
          Sponge foam ball rebound tester -HMLQ-500
          Sponge foam compression tester -HMYS-200
          Sponge foam cutting machine HMQG-100
          Canton company for products in strict accordance with the national standard production, strict manufacturing process to ensure that every factory equipment quality and

          performance excellence, quality service, quality and cheap.
          To the credibility to the quality of casting market main customers with technical and customer service to create the future.
          Professional, technical precision, Gao Kua,
          Beijing North Canton precision instrument equipment limited www.beiguangjy.com


          留言框

          • 產品:

          • 您的單位:

          • 您的姓名:

          • 聯系電話:

          • 常用郵箱:

          • 省份:

          • 詳細地址:

          • 補充說明:

          • 驗證碼:

            請輸入計算結果(填寫阿拉伯數字),如:三加四=7
          主營產品:電壓擊穿試驗儀,介電常數介質損耗測試儀,體積表面電阻率測試儀,海綿泡沫落球回彈試驗儀,介電常數測試儀,體積電阻率測試儀,海綿泡沫壓陷硬度試驗儀,介電擊穿強度試驗儀,橡膠塑料滑動摩擦磨損試驗機,耐電弧試驗儀,毛細管流變儀,自動進樣器,電氣強度試驗機,歡迎來電咨詢。
          版權所有©2025 北京北廣精儀儀器設備有限公司

          化工儀器網

          推薦收藏該企業網站
          主站蜘蛛池模板: 久久精品天天中文字幕人妻 | 国产精品哟女在线观看| 国产欧美日韩精品a在线观看 | 精品国内片67194| 国产伦精品一区二区三区| 午夜亚洲av永久无码精品| 久久性精品| 国产天天综合永久精品日| 国产精品无码日韩欧| 亚洲国产主播精品极品网红| 午夜不卡久久精品无码免费| 日韩精品久久无码中文字幕| 久久亚洲中文字幕精品有坂深雪| 国产综合色产在线精品| 亚洲国产精品一区二区九九| 99久久精品九九亚洲精品| 久久91这里精品国产2020| 尤物yw午夜国产精品视频| 少妇精品无码一区二区三区| 国产99视频精品一区| 亚洲情侣偷拍精品| 欧美精品国产一区二区三区| 国精品无码A区一区二区| 国产AV无码专区亚洲精品| jiucao在线观看精品| 亚洲精品狼友在线播放| 国产福利91精品一区二区| 久久久久久亚洲Av无码精品专口| 四虎成人精品| 久久91精品综合国产首页| 国产系列高清精品第一页| 国产精品毛片一区二区| 中文字幕精品亚洲无线码一区应用 | 99久re热视频这里只有精品6| 国产精品高清免费网站| 久久99国产精品久久99果冻传媒| 国产亚洲色婷婷久久99精品| 久久亚洲精品成人av无码网站| 亚洲精品乱码久久久久久久久久久久 | 在线精品亚洲一区二区三区| 亚洲AV无码成人精品区大在线|